-40%

US UNO R3 MEGA328P ATmega16U2 Development Board + USB Cable SGHS For Arduino

$ 3.42

Availability: 702 in stock
  • UPC: Does not apply
  • Condition: New
  • Type: Board
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days
  • MPN: Does Not Apply
  • All returns accepted: Returns Accepted
  • Brand: Unbranded/Generic
  • Return shipping will be paid by: Buyer
  • Restocking Fee: No

    Description

    US UNO R3 MEGA328P Development Board + USB Cable SGHS For Arduino ATmega16U2
    Specifications:
    Size: 75 * 55 *15 mm / 3 * 2 * 0.6 in
    Working voltage: 5V
    Input voltage: no external power supply is required when connecting to USB Or Connect external power supply for 7V-12V DC
    Microprocessor: ATmega328P
    Bootloader: Carduino Uno
    Clock Frequency: 16Mhz
    Input Voltage: 7-12V (recommend)
    Input voltage: 6-20V (Limited)
    Support USB interface Protocol and USB power supply (do not need external power)
    Support ISP Download function
    14 digital Inputs and outputs: working voltage is 5V,
    Each road can output and access the maximum current of 40mA
    (1) Serial port Signal RX (NO.0), TX(NO.1): Connected with the internal chip for ATmega8U2 USB-to -TTL,
    provides the TTL voltage level serial receive signal
    (2) External interrupt(NO.2 and NO.3): trigger interrupt pin,
    Can be set to rising edge, falling edge or trigger at the same time
    (3) Pulse Width Modulation(NO.3,NO.5,NO.6,NO9,NO.10,NO.11):
    Six 8-bit PWM outputs are provided
    (4) SPI(  NO.10(SS), NO.11(MOSI), NO.12(MISO), NO.13(SCK)  ): SPI communication interface
    (5) LED(NO.14):
    Arduino dedicated to test the LED to retain the interface, the output is high when the LED is lit, otherwise the output is low LED off
    6 analog inputs A0 to A5:
    each channel has a resolution of 10 bits (ie, 1024 different values are input), and the default input signal range is 0 to 5V
    AREF:
    the reference voltage for the analog input signal
    Reset:
    Signal is reset when the microcontroller chip
    DC current: 40mA (I/O interface)
    DC current: 50mA (3.3V port)
    Flash memory: 32 KB(
    ATmega328 of which 0.5 KB for the boot process
    )
    Package Includes:
    1 x UNO R3 Board (with USB cable)
    Terms and Conditions :
    Shipping
    Shipping to most other countries takes about 10-30 days via Economy Int'l Airmail without tracking#. In rare case, it can take up to 40 days.
    It depends on your location and local postal service(e.g., Russian Postal service is slow),
    as well as the weather condition along the shipping.
    Please verify your primary shipping address. We are not responsible for any wrong or undeliverable addresses
    .
    Payment
    We accept payment via Paypal.
    The buyer is responsible for any applicable import duties and local taxes.
    Usually there's no any charges for small parcel. But please verify with your customs before making your purchase.
    Contact Us
    We take full responsibility if you receive wrong item or damaged item or item not as describled.
    If you're not satisfied for any reason, please feel free to contact us. Just send us an message or email.
    You can always get our solution pretty soon in our working time.
    Your satisfaction is guaranteed.
    About UG
    Thank you for choose UG.
    As a manufacturer of electronic module, UG have been in business more than 20 years, and therefor have wide experience in all the line we handle.
    OEM Service Also Welcome!