-40%
TOUCH UP PAINT FOR SUBARU FORESTER WITH COLOR CODE K1X, CRYSTAL WHITE, 1 OZ.

TOUCH UP PAINT FOR SUBARU FORESTER WITH COLOR CODE K1X, CRYSTAL WHITE, 1 OZ.

$ 11.61

Availability: 32 in stock
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 14 Days
  • Compatible Model: Most Subaru vehicles
  • Manufacturer Color Name: CRYSTAL WHITE
  • Returns Accepted: Returns Accepted
  • Paint Type: Base Coat
  • Manufacturer Paint Code: K1X
  • Compatible Make: For Subaru
  • Application Site: Body
  • Application Type: Brush-on
  • Refund will be given as: Money Back
  • Volume: 1oz.
  • Color: White
  • Brand: BASF
  • Features: Fast-Drying
  • Restocking Fee: 20%
  • Condition: New
  • Manufacturer Part Number: K1X

    Description

    Touch up paint for Subaru color code K1X.
    Also known as Crystal White.
    This color is a 3 layer pearl color.
    You will be sent one ounce of each layer in separate bottles.
    First layer will be the white base coat.
    Second layer will be the translucent pearl coat.
    Third layer will be the clear coat.
    We sell BASF paint, same brand many auto manufacturers use.
    This is the same type of paint (base coat) as the factory used on your car.
    Primer is recommended for deeper damage where the underlying surface is exposed.
    We use a 2 oz. bottle with a childproof cap that has a brush attached to the bottom for easy application direct from the bottle.
    If you ordered one ounce, the bottle will be filled to the 1 oz. mark.
    Representative photo of product. Paint will be correct to your paint code.
    For any other paint color, primers, clears or other supplies please check my eBay store.
    Application Instructions
    Step 1
    .
    Clean the damaged area. Remove all dirt, oils or waxes. Alcohol works well for this.
    Step 2.
    Shake the touch up paint for at least 30 seconds after the mixing ball has released.
    Step 3.
    Apply the white coat, bottle marked 1ST LAYER. Apply in thin layers building up the repair until the damage is solid white.
    Wait until paint has fully dried before applying the next layer.
    Multiple thin layers work better and dry faster than trying to knock it out in one thick layer.
    Step 4.
    Apply the pearl coat,
    bottle marked 2ND LAYER
    . Amount of coats will vary. Apply enough pearl coat until you are satisfied with the repair.
    Step 5.
    Apply clear coat,
    bottle marked 3rd LAYER
    . Most repairs will be fine with one layer.
    Please note :
    Although we achieve a 99%+ color match, other factors can affect a color matching perfectly. Various environmental factors as well as color variations at manufacturing facilities make it impossible to paint match with paint code alone 100% of the time.