Revotech 2 Port POE Extender POE+ Repeater 100 Meters328 ft Extender 1 in 2 O...

Description

Revotech 2 Port POE Extender POE+ Repeater 100 Meters(328 ft) Extender 1 in 2 Out Comply IEEE 802.3af/at Standard 10,100Mbps for POE Over Cat5/Cat6 or UTP Cables(POE5003)
Note:1. Please don't place any heavy thing on the PoE extender;2. To prevent the water seeping into the extender, please keep PoE extender away wet environment;3. Suggest to use PoE extender indoors. When installing the extender in outdoor please install it in a waterproof place.PoE Extender is a cost effective way to extend the Ethernet network range beyond 100m, delivering both data and power to network devices such as WLAN Access Points and Network Cameras up to a distance of 200m while complying with IEEE PoE and Data standards.Other Specification:PoE input: 1 RJ45 port(DC 48-57V)PoE output: 2 RJ45 portInput power: 30 Watts MaxOutput power: 15.4 Watts MaxNetwork Medium: Cat5 ,Cat5e,Cat6,Cat6e,UTP cable(less than 120m)Daisy Chain Distance: up to 700m(6 pieces)Repeater Mode: and forwardMAC Address Table: 2KPacket Buffer Memory: 48 ByteSwitching Capacity: 400MbpsPoE Standard: IEEE 802.3af/atPoE Cable Core: 1/2(+), 3/6(-)Power Supply Type: Mode A,End-SpanLED Display: PoE Working status, EthernetNetwork Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet.Electromanetic Radiation: FCC Class A, CEStorage Humidity: 5%~90%, No CondensationOperating temperature: -10～45℃Dimension: 88mm*44mm*22mmWeight: 52gPackage contents:1 x 2 Port POE Extender (POE5003)
【1 In 2 Out】The PoE Extender features 1 PoE 30W input port and 2 PoE 15W output port. Supply power and Ethernet data for 2 terminal PoE device by 1 RJ45 cable (Cat5,Cat5e,Cat6,Cat6e,UTP cable)
【100M Extension】The POE extender can extend the range of the Ethernet network by an additional 100m (328 ft). Extended PoE installation range by additional 100M. The maximum is 700 meters (2,296ft) when deployed in cascade.
【Support IEEE 802.3af/at】Supports 10/100Mbps data rates, comply with IEEE 802.3af/at Standard. It can supply 2 PoE 15W ouput when powered by IEEE 802.at source.
【Plug and Play】The PoE Extender cost effective installation - does not require local power and other configuration required. Powered via the PoE input, Plug and Play. Automatically detects and protects PoE equipments from being damaged by incorrect installation.
【Expend PoE Layeout】This PoE Extender is small and delicate, only weight 52g, size 8.8x4.4x2.2cm. Easy to expend your PoE layout even in long distance