iProtect 1216 Counter Surveillance 3 RF Band Spy Detector

Description

The iProtect 1216 is a latest new professional RF detector created for discovering all types of RF eavesdropping devices, including analog and digital, as well as those that transmit information over mobile networks and using wireless standards. Does NOT come with original box. DOES come with original OEM manual.
KEY FEATURES
3-band detection
The frequency range of the 1216 has been split into 3 parts, each displayed by a separate bargraph: "VHF/UHF 50-700 MHz", "Mobile and wireless 700 MHz – 3 GHz" and "Microwave and wireless 3-12 GHz". The separate indication allows the operator to understand better what type of signal is detected, to detect several signals at the same time and to sustain the ability of detection near the sources of interference
Microwave
The third "microwave" band of the iProtect 1216 covers the 3-12 GHz frequency range. This band detects Wi-Fi and other wireless protocols operating at 5 GHz and on any higher frequencies. The microwave frequencies are supposed to be more covert since they are not detectable by common RF detectors. The iProtect 1216 finds these signals easily
Alarm
The Alarm feature helps the operator to reject background interference by adjusting the threshold. When a signal exceeds the alarm threshold the device produces an alerting sound. The Alarm is also extremely convenient when probing hard-to-access places or keeping the device in the "guarding" state. The alarm threshold has 48 tuning steps
Histogram
In the ONE BAND display mode the iProtect 1216 shows the histogram for the selected band in addition to the bargraph. The histogram draws the history of the signal obtained over the last 5 seconds and is very informative when observing intermittent/periodical signals or when probing the area quickly
Wi-Fi and 3G
The iProtect 1216 has a significantly higher sensitivity to the 3G, Wi-Fi and Bluetooth bugging devices compared to conventional RF detectors. This advantage was achieved with the help of the additional radio frequency paths in the circuit dedicated to the specific frequency spans
Signature
In addition to drawing a bargraph the iProtect 1216 can identify some types of signals and show a corresponding message on the display: cordless DECT device in an “idle” state, active DECT device, GSM, 3G, Wi-Fi/Bluetooth
ALL FEATURES
Detects all types of RF transmissions including analog and digital, audio and video
Frequency range 50 MHz – 12 GHz
Separation into 3 bands helps to avoid loss of sensitivity near strong interference
ALL BANDS and ONE BAND display modes
High sensitivity to 3G and wireless protocols (Wi-Fi, Bluetooth, etc.)
Working modes: SILENT, AUDIO and ALARM
Adjustable alarm threshold
Portable, reliable and easy-to-use
The BARGRAPH shows the momentary RF level
The HISTOGRAM displays the RF signal over 5 seconds (in 'ONE BAND' display mode)
The SIGNATURE displays the possible signal type
Built-in directed microwave antenna
Shock-resistant CNC milled duralumin housing
Rechargeable Li-Ion battery with resource of 6 hours
Controlled by microcontrollers
2x built-in OLED displays
SPECIFICATION
Frequency range
: 50 MHz – 12 GHz
Band 1: 50 – 700 MHz
Band 2: 700 MHz – 3 GHz
Band 3: 3GHz – 12 Ghz
Indicators
: Main display; Status display
Display modes
: ALL BANDS, ONE BAND
Working modes
: SILENT, AUDIO, ALARM
RF connector
: SMA (band 1 and 2), 50 Ohm
Microwave antenna
: Built-in (band 3)
Threshold settings
: 48 steps
Battery Rechargeable
: Li-Ion [email protected]
Battery resource
: 6 hours
Recharge time
: 4 hours
Recharge source
: USB
Dimensions with antennas
: 173x71x21 mm
Weight
: 265 g
Operating temperature
: -10° C to 45° C
FREQUENCY COVERAGE
SUPPLIED SET
Detector
Rod antenna
Mini-USB cable for recharging
Original Manual
**Item is pre-owned and is in great working condition. Scuffs and scratches shown in photos. Item is sold AS-IS**
** FREE USPS PRIORITY SHIPPING**