Gigabit 4 port PoE extender/repeater / Splitter, POE-EX2005, 60W

Description

Gigabit 4 port PoE extender / Splitter, POE-EX2005, 60W, NO Power required.
Description
Ethernet and PoE connections both restrict cable distances to 100 meters between network ports. To overcome this distance limit, network installers can simply connect an PoE Extender in-line with the Cat-5e or Cat-6 calbe.
With Gigabt PoE Extender, PDs (such as IP Security Cameras, VoIP telephones, wireless access points) can be installed at greater distances than 100 meters from one another. By connecting PoE Extender for every extra 100 meters of cable, both Ethernet and PoE can be extended to 200 meters, 300 meters, or even greater distances, depending on PDs power required and power source.
Gigabit PoE Extender does not require any additional power supply and the connected PDs is fed by an single PoE switch or mid-span, which simplifies installation. PoE Extender offers Three Ethernet ports, which are both configured automatically for link speed, duplex and crossover and the full-rate network throughput is in connection PoE Swith, 12.36 or 45.78 powered support, support IEEE802.3af & at  the power supply, PoE out for the supply terminal 2 Gigabit, PoE total power can reach 30w (PoE Switch need to provide IEEE802.3at power)
Features
Compatible with IEEE802.3af and IEEE802.3at
Extends the range of PoE and Ethernet an additional 100 meters
No additional power supply is required
Automatically detects and protects PoE equipments from being damaged by incorrect installation
Full-rate network throughout the whole extended distance
Wall-Mountable design
Easy plug-and-play installation
EMI standards complies with FCC, CE class B
Specifications
Item
Description
No. of channels
1(PoE IN) into 4(PoE OUT)
Pass Through Data Rates
10/100/1000 Mbps half/full duplex
Power over Ethernet input
Pin Assignment and Polarity:
Both 1/2 (-), 3/6 (+) and  7/8 (-), 4/5 (+)
Power over Ethernet Output
Pin Assignment and Polarity:
1/2 (-), 3/6 (+)
Output Power: up to 22W
Indicators
LED indicators are located on the RJ45 connector
Power indicator: PoE enabled
Powered success:Power
Network indicator: Link/Act
Connectors
Shielded RJ-45, EIA 568A and 568B
Network cables
Shielded category 5 (or higher)
Dimensions
119mm x 85mm x 28mm
Mounting
Wall of shelf
Environment
Indoor or Outdoor
Environmental Conditions
Operating Ambient Temperature:-10 to 45℃
Operating Humidity:
Maximum 90%, Non-condensing
Storage Temperature:-30 to 70℃
Storage Humidity:
Maximum 95%, Non-condensing
Regulatory Compliance
IEEE 802.3af (PoE), IEEE 802.3at (PoE+)
Application
Maximum Distances for Power Sources
Multiple PoE Extenders can be connected every 100 meters to obtain greater distances. The actual figures depend on operating conditions. The range is over 24 AWG or heavier Cat-5e or Cat-6 cable except where specified.
Examples for medium power PoE Devices (that are PoE Class 2, or require under 6 watts)
PoE Source
PoE switch (802.3af,Output voltages  50V)
15W mid-span (802.3af,Output voltages  50V)
PoE+ switch (802.3at,Output voltages 50V)
30W mid-span (802.3at,Output voltages 50V)
Maximum Distances
300m
300m
400m
400m
Examples for full power PoE Devices (that are PoE Class 0 or 3, or require under 12 watts)
PoE Source
PoE switch (802.3af,Output voltages  50V)
15W mid-span (802.3af,Output voltages  50V)
PoE+ switch (802.3at,Output voltages  50V)
30W mid-span (802.3at,Output voltages  50V)
Maximum Distances
200m
200m
300m
300m
Examples for PoE+ Devices (that are PoE Class 4 that under 22 watts, or 802.3at compliant)
PoE Source
PoE switch (802.3af,Output voltages  50V)
15W mid-span (802.3af,Output voltages  50V)
PoE+ switch (802.3at,Output voltages  50V)
30W mid-span (802.3at,Output voltages  50V)
Maximum Distances
Not applicable
Not applicable
200m
200m